How To Order
To order the strip light to a specific length (eg 1.3 meters) simply choose the “per meter length” option.
As this strip is charged as a per meter length simply choose quantity 2 and add to cart. You can then “add cart note” and type in the cart note that you require the strip to be 1.3 meters in length.
If you are unsure of this process or you would like some expert guidance please call our office on 1300 589 726.
Alternatively you can choose to order a 5 meter uncut reel of strip and cut it on site to suit your required length.
This COB flexible strip light creates a seamless visual linear light, eliminating the often-seen visual dots of traditional strip lights. Perfect for installations where the strip will be visible in aluminium profile, its dotless design also allows for the use of a less opaque (diffused) profile cover, maximising light transmission without minimising dots. With a 10W/m rating, this LED strip light emits medium to high levels of light while boasting a CRI of >90, ensuring true and accurate colour representation.
COB is an acronym for: Chip on Board
The PCB is made using 3oz copper, this reduces voltage drop, so allows for a continuous 10m length without visible loss of brightness.
The thermal efficiency of this LED strip means it does not require a heatsink allowing it to be mounted to almost any smooth hard surface.
This LED strip carries an IP rating of 20, this is an indoor / dry environment LED strip only.
- Requires 12V or 24V driver (sold separately)
- Choose from a range of drivers between 60W and 200W to match the length of flexi-strip required
- Remote, wall mounted and CONNECT Wi-Fi controllers available as accessories
- For runs over 5m individual lengths should be connected in parallel
- Easy clip connector packs available as accessories
| Electrical Data | |
|---|---|
| Voltage |
12 VDC 24 VDC |
| Wattage 1m | 10 W |
| Current 1m | 0.45 A |
| LED Data | |
| Package Type | COB (Chip on Board) |
| Chips LED | 1 |
| LEDs 1m | 320 |
| Photometric Data | |
| Colour Temperature | 4000K |
| Colour Rendering Index Ra | >90 |
| Luminous Flux 1m | 1000lm |
| Luminous Efficacy | 100 |
| Beam Angle | 120° |
| Dimmable | 1 ∼ 100% (refer data sheet) |
| Construction / Protection Data | |
| Substrate | Double layer FPCB 3oz |
| Mounting | Double sided tape |
| IP Rating | IP20 |
| Operating Temperature | -20 ∼ +70 C° |
| Storage Temperature | -20 ∼ +50 C° |
| Dimensions | |
| Cutting increments | 50.0mm |
| Length | 5m |
| Width | 10.0mm |
| Height | 2.0mm |
| Lifetime | |
| Working Life | 70,0000 hrs |